The Power Additives range is enriched with two new products:
- the LFAP/DPF Washing Treatment (cod. 4110021300)
- the FAP/DPF Rinsing Treatment (cod. 4110021310)
The filter cleaning treatment must be carried out according to the following procedure:
- The Washing Treatment is applied through the appropriate dispenser (code 4110001210) that saves you having to disassemble the filter and ensures cleanliness from any contamination, without residue. The product should be applied by spraying about 750 ml of product upstream of the particulate filter towards the outlet of the exhaust system, and leaving for 30-40 minutes.
- Subsequently, again through the use of the dispenser, the Rinsing Treatment is applied, which enables the carbonaceous residues and soot previously detached from the cleaning liquid to be removed permanently. The product must be left on for about 4-5 minutes and only then the engine must be started at idle speed for about 20 minutes.
- Finally, to cause a regeneration cycle of the filter, the vehicle must be tested on the road by slightly forcing the engine.
In case of a filter with mechanical damage - such as melting of the cells - it is recommended not to carry out the treatment, but to replace the filter with a new one.
Ask your trusted Meccanocar agent and always remember that with a cleaner engine you reduce consumption and emissions!